MAIN SERVICE PROGRAM MODE TABLES
B234/B235/B236/D101/D102/D103 5-50 SM
SP5-nnn Mode
5019 Tray Paper Size Selection
Selects the paper size for the trays.
[LT LEM: USA version
A4 LEM: Other versions
002 Tray 1
005 Tray 4
006 Tray 5
007 Tray 6
5024 mm/inch Selection
Selects whether mm or inches are used in the display.
Note: After selecting the number, you must turn the main power switch off and on.
Europe/Asia model: [0 = mm / 1 = inch]
American model: [0 = mm / 1 = inch]
5040 Custom Size: Vertical
Adjusts the vertical dimension of custom size paper for Tray 1. ‘Custom size’ must be
selected with SP 5019-2.
002 Tray 1
005 Tray 4
006 Tray 5
007 Tray 6
[210.0~305.0 / 297.0 / 0.1 mm]
5041 Custom Size: Horizontal
Adjusts the horizontal dimension of custom size paper for Tray 1. ‘Custom size’ must be
selected with SP 5019-2.
002 Tray 1
005 Tray 4
006 Tray 5
007 Tray 6
[210.0~305.0 / 297.0 / 0.1 mm]
5045 Accounting Counter
Selects the counting method if the meter charge mode is enabled with SP5-930-
001.
Note: You can change the setting only one time.
[0 to 1/ 1]
0: Development counter. Shows the total counts for color (Y,M,C) and black (K).
1: Paper counter. Shows the total page counts for: Color Total, Black Total, Color
Copies, Black Copies, Color Prints, Black Prints.
To Next Page
Loading...
