TOUCH SCREEN CALIBRATION
3-192
3.19 TOUCH SCREEN CALIBRATION
When the touch panel detection mechanism is not working properly, calibrate the
touch screen as follows:
1. Push [Clear] ( ), push 1993, and then press [Clear] 5 times.
2. Select “[1] Touch Screen Adjust”.
NOTE: [2] tests the LEDs on the operation unit, not the machine’s main
operation panel. Keys [3] [4] [5] [6] [7] are for factory use only. Do not
use unless directed by senior technical staff.
B234R879.WMF
B234R878.WMF
To Next Page
Loading...
