Key Counter
SM 1-125 B234/B235/B236/D101/D102/D103
Installation
18. Connect the extension cable [A] from the LCT to the copier.
19. Dock the LCT to the copier.
User Tool and SP Mode Settings
1. Instruct the key operator to enable the key counter with the User Tools setting:
User Tools> System Settings> Administrator Tools>
Key Counter Management> ON
Then select and enable the items for the counter (Copier, Document Server,
Printer, Scanner).
2. Enter the SP mode
• Confirm that the setting for SP5121 is “0” (Default: Paper Feed Count). This
sets the counter for paper feed ("1" sets for paper exit).
• Confirm that the setting for SP5113 is "0".
B070I210.WMF
[A]
To Next Page
Loading...
