DEVELOPMENT AND TONER SUPPLY
3-78
3.8.9 TONER SUCTION BOTTLE
1. Remove the right upper cover. (3.3.4)
2. Open the right front door.
3. Tap the hose [A] to clear toner from the opening of the hose.
4. Bracket [B] ( x 1).
5. Toner suction bottle [C] (hose x 1).
NOTE: During transport and disposal of the used bottle, make sure that toner
does not spill from top opening [D].
6. After replacing or emptying the toner suction bottle, do SP2972 and reset it to
"0".
B234R165.WMF
[A]
[B]
[C]
[D]
To Next Page
Loading...
