Memory All Clear: SP5801
SM 5-185 B234/B235/B236/D101/D102/D103
Service
Tables
5.7 MEMORY ALL CLEAR: SP5801
As a rule, you should always print an SMC Report before initializing or adjusting
the SP settings. The SMC Report provides a concise list of all the SP commands
and their current settings. The report can be used for reference if the service
manual is not available.
Executing Memory All Clear resets all the settings stored in the NVRAM to their
default settings except the following:
SP5-811-1: Machine serial number
SP5-907: Plug & Play Brand Name and Production Name Setting
1. Execute SP5990 to print out all SMC Data Lists.
2. Open SP5801.
3. Press the number for the item that you want to initialize. The number you select
determines which application is initialized. For example, press 1 if you want to
initialize all modules.
No. What It Initializes Comments
1 All modules Initializes items 2 ~ 15 below.
2 Engine
Initializes all registration settings for the engine and copy
process settings.
3
SCS (System
Control Service)
/SRM
Initializes default system settings, CSS settings, operation
display coordinates.
4 IMH Initializes the image file system.
5
MCS (Memory
Control Service)
Initializes the automatic delete time setting for stored
documents.
6 Copier application Initializes all copier application settings.
8 Printer application
Initializes the printer defaults, programs registered, the printer
SP bit switches, and the printer CSS counter.
9 Scanner application
Initializes the defaults for the scanner and all the scanner SP
modes.
10 Network application
Initializes all service-mode settings about access to the
document server from the DeskTopBinder software on a PC.
For example, initializes the resolution of images the PC gets
using the image converter board option.
11
NCS (Network
Control Service)
Initializes the system defaults and interface settings (IP
addresses also), the SmartNetMonitor for Admin settings,
WebStatusMonitor settings, and the TELNET settings.
14 DCS Initializes the DCS (Delivery & Receive Control Server) settings.
15 UCS Initializes the UCS (User Directory Control Server) settings.
To Next Page
Loading...
