Ricoh B234 - Attaching the Brackets

Z-Folding Unit ZF4000 (B660)
SM 1-83 B234/B235/B236/D101/D102/D103
Installation
Attaching the Brackets
B234/B235/B236/D101/D102/D103
1. Attach the long connection bracket [A] to the unit (3000-Sheet Finisher B830 or
Booklet Finisher B836) to the left of the Z-folding unit ( x4 M4x10).
NOTE: Use the long screws provided with the Z-fold unit accessories.
2. Attach the brackets to the lower left corner of the Z-fold unit.
Important
• If the 3000-Sheet Finisher B830 will be docked to the Z-folding unit, attach
only bracket  ( x2).
• If the Booklet Finisher B836 will be docked to the Z-folding unit, attach both
brackets  and  ( x2 ea.).
3. Attach the ground (earth) plate [B] to the side of the Z-folding unit facing the
copier.
B660I004A.WMF
[A]


B830/B836