Ricoh B234 - Lcit Rt5000 B832;Lcit Rt5010 B834

MULTI BYPASS TRAY (B833)
B234/B235/B236/D101/D102/D103 1-68 SM
LCIT RT5000 B832/LCIT RT5010 B834
1. Remove the handle [A] ( x 2). Save these screws.
2. Remove the cover [B] ( x 4).
3. Use the screws removed above to attach the handle [C] to the front frame.
4. Fasten the bypass tray rear frame [D] to the LCT ( x 1).
5. Fasten the bypass tray front frame [E] to the LCT ( x 1).
6. Connect the bypass tray harness [F] to the LCIT ( x4).
7. Re-attach the cover [B].
B833I109.WMF
B833I110.WMF
[A]
[B]
[C]
[D]
[E]
[F]