Ricoh B234 - Minimum Space Requirements

INSTALLATION REQUIREMENTS
SM 1-3 B234/B235/B236/D101/D102/D103
Installation
1.1.3 MINIMUM SPACE REQUIREMENTS
Place the copier near the power source, providing clearance as shown below. The
same amount of clearance is necessary when optional equipment is installed.
NOTE: The controller box door [A] and PSU door [B] on the back of the machine
swing open and can be removed. Both doors can be removed to allow the
machine to pass through a narrow doorway. (1.3.4)
B234I023.WMF
[A]
[B]
200 (7.9)
Units: mm (in.)
30 (1.2)
555 (21.9)
400 (15.8)