Ricoh B234 - Browser Unit (B828)

Installation of MFP controller Options
SM 1-141 B234/B235/B236/D101/D102/D103
Installation
1.15.8 BROWSER UNIT (B828)
Accessories
Description Q’ty
1. Browser Unit B828 SD Card ..................................................1
Installation
1. Switch the machine off.
2. Push the SD card [A] into Slot C3.
NOTE: Pushing in the SD Card also
releases it for removal. Make sure the
SD Card is inserted and locked in
place. If it is partially out of the slot,
push it in gently until it locks in place.
3. Turn the machine on.
4. Push [User Tools].
5. Push [Login/Logout] on the operation
panel
6. Login with the administrator user name
and password.
7. Touch "Extended Feature Settings".
8. Touch "Extended Feature Settings" again.
9. Touch "SD Card".
10. Touch the "Browser" line.
11. Under "Install to:" touch "Machine HDD" and touch "Next"
12. When you see "Ready to Install" check the information on the screen to confirm
you previous selection.
13. Touch "OK". You will see "Installing…" then "Completed".
14. Touch "Exit" twice to return to the copy screen.
15. Remove the SD card from slot C3.
B070I902.WMFMF
[A]