Ricoh B234 - Signature Path; Stacking Tray

PM TABLES
B234/B235/B236/D101/D102/D103 2-16 SM
Interval Part
EM Predicted Clean
Comments
capability
Relay Reflective Sensor
Mirrors: Large
Cle
an
200 K sheets 200 K
sheets
Jams, sensor adjustment
error (if not cleaned)
Ripple Rollers EM 1,000 K sheets 1,000 K
sheets
Pressure on paper
becomes loose, paper
cannot exit
Signature Path
Part Interval Predicted Comments
Anti-Static Brush 1:
Signature Path
EM 2,000 K sheets Due to large amount of discharge,
excessive amount of spill around
trimmer unit. Poor stacking in
stacking tray.
Anti-Static Brush 2:
Signature Path
EM 2,000 K sheets Due to large amount of discharge,
excessive amount of spill around
trimmer unit. Poor stacking in
stacking tray.
Stacking Tray
Part Interval Predicted Clean Comments
Switchback Roller EM 1,000 K sheets Trailing edge of paper does
not return (Trailing edge does
not align correctly in stacking
tray)
TE Press Roller:
Large
EM 1,000 K sheets Stack edge does not align
correctly
TE Press Roller:
Small
EM 1,000 K sheets Stack edge does not align
correctly
Jogger Motors EM 15,000 K sheets Jogger motor error, signature
stack does not align correctly
Anti-Static Brush:
Stacking Tray
EM 2,000 K sheets Due to large amount of
discharge, excessive amount
of spill around trimmer unit
Poor stacking
Rollers: Stacking
Tray
Clean 1,000 K
sheets
Jam, skew due to deterioration
in feed capability
Main Grip Unit
Part Interval Predicted Replace Comments
Main Grip
Motors
EM 100 K
signatures
Main grip motor error, PCB
damaged (blown fuse)
Signature
Thickness
Sensor
EM 50 K
signatures
Signature thickness sensor
error.
Use the Service Board DIP
switches to adjust the signature
thickness for 25 mm.
⇒
Rev. 08/2008