Ricoh B234 - Image Position Board and Sensor

REPLACEMENT AND ADJUSTMENT
B834 18 SM
1.11 IMAGE POSITION BOARD AND SENSOR
Image Position Sensor
• Disconnect the LCT from the copier.
[A] Image position sensor unit ( x2,  x1)
[B] Stopper ( x1)
[C] Image position sensor
• After replacing the image position sensor do the procedure for image position
sensor adjustment. (1.12)
Image Position Sensor Board
• Disconnect the LCT from the copier.
[D] Cover ( x2, = x2)
[E] Image position sensor board ( x2,  x2, = x2)
B834R113.WMF
[A]
[B]
[C]
[E]
[D]