Ricoh B234 - To Switch to the Copy Window for Test Printing

SERVICE PROGRAM MODE OPERATION
B234/B235/B236/D101/D102/D103 5-2 SM
To Enter and Exit the SP Mode
1. Press Clear Modes key J.
2. On the operation panel keypad, press .
3. Hold down Clear key more than 3 seconds.
The Copy SP or PM Counter items are displayed. If the printer or
scanner/printer option is installed, the Printer SP and Scanner SP items are
also available.
4. Press Copy SP.
5. To exit the SP mode, just press Exit in the upper right corner of the SP mode
screen.
To Switch to the Copy Window for Test Printing
1. In the SP mode display, press Copy Window to switch to the copy operation
screen when you need to select paper for a test print.
2. Use the copy window (copier mode) to select the appropriate settings (paper
size, etc.) for the test print.
3. Press Start key C to execute the test print.
4. Press SP Mode (highlighted) to return to the SP mode screen and repeat from
step 1.