Ricoh B234 - User Service Program Mode Tables

Main Service Program Mode Tables
SM 5-153 B234/B235/B236/D101/D102/D103
Service
Tables
5.2.4 USER SERVICE PROGRAM MODE TABLES
Do either procedure to display the SP codes for operators or skilled operators
(Super Users).
Adjustment Settings for Operators
1. Push [User Tools].
2. Touch [Adjustment Settings for Operators].
The operator SP codes are displayed.
• You will not see the SP codes marked "Super User Only" in the SP tables
below.
• These "Super User" SP codes are displayed only after you enter the user SP
mode with the procedure below.
Adjustment Settings for Skilled Users
To open the user SP mode with this procedure, you must have an assigned user
name and password.
The user name and password must be assigned by the system administrator.
For more details, please refer to the TCRU (Trained Customer Replacement Units)
manuals.
1. Push [User Tools].
2. Touch [Adjustment Settings for Skilled Operators].
3. Touch [Enter] to the right of "Login User Name".
4. On the soft keyboard enter your assigned user name and touch [OK].
5. Touch [Enter] to the right of "Login Password".
6. On the soft keyboard enter your assigned password and touch [OK].
The operator and skilled operator SP codes are displayed.