Ricoh B234 - Lct Exit Motor

REPLACEMENT AND ADJUSTMENT
B832 8 SM
1.4.5 LCT EXIT MOTOR
Remove:
• Remove the rear cover. (1.1)
[A] Motor unit ( x6,  x 1).
[B] Spring (x1). First, loosen screw  ( x 1).
[C] LCT exit motor ( x2, Timing belt x1)
Reinstallation
• Be sure that the tension spring is connected, then tighten the screw .
B832R109G.WMF
B832R109H.WMF
[A]
[B]
[C]
