Ricoh B234 - Adf; Finisher Sr5000 B830; Punch Unit Pu5000 B831

PM Tables
SM 2-11 B234/B235/B236/D101/D102/D103
Preventive
Maintenance
2.2.2 ADF
The PM interval is for the number of originals that have been fed.
80K 120K 140K Note
Transport belt R Clean with damp cloth, or alcohol
Feed belt R
Separation roller R
Pick-up roller R
Sensors I I Blower brush
Drive gears
I I
Lubricate with a very small amount of
G501.
2.2.3 FINISHER SR5000 B830
500K 2500K 3000K Exp Note
Driver rollers I Alcohol, dry cloth
Idle rollers I Alcohol, dry cloth
Discharge brush I Alcohol, dry cloth
Alignment brush roller
R
Bushings
Lubricate with Silicone or
Launa oil if noisy.
Sensors I Blower brush.
Jogger fences
I
Make sure screws are
tight.
Staple unit
500K Staple
Sheets
Positioning roller R
Shift positioning roller R
2.2.4 PUNCH UNIT PU5000 B831
Exp
Punch unit B531 1 million punches