Ricoh B234 - Transfer Belt

TRANSFER BELT UNIT
SM 3-85 B234/B235/B236/D101/D102/D103
Replacement
Adjustment
3.9.2 TRANSFER BELT
1. Remove the transfer belt unit. (3.9.1)
2. Raise knob [A], then disconnect the connectors [B] ( x 2).
3. Turn the transfer belt upper unit [C] 90 degrees counterclockwise, then raise
and remove it.
4. Remove the screws ,  ( x 2).
B234R521A.WMF
B234R552.WMF
[A]
[B]
[C]


[B]