Ricoh B234 - Accessories; Ieee 802.11 B (G813); Installation

INSTALLATION OF MFP CONTROLLER OPTIONS
B234/B235/B236/D101/D102/D103 1-146 SM
1.15.12 IEEE 802.11B (G813)
Accessories
Description Q’ty
1. IEEE 801.11b Board..............................................................1
2. PCI Card................................................................................1
3. Cover Cap..............................................................................1
Installation
Only one PCI slot (B2) is available for one of these options:
• Centronics 1284
• IEEE 1394 (FireWire)
• IEEE 801.11b (Wireless LAN)
• Bluetooth Interface Unit B826
• Cumin-M B818
Important
• If another card is installed in B2, you must remove it before installing this card.
1. Switch the machine off.
2. Remove the cover [A] of Slot B2 ( x 2).
3. Insert the PCI card [B] into the wireless LAN board [C].
4. Insert the wireless LAN board [C] into Slot B2 and fasten it with the screws.
5. Attach the cap [D].
6. Switch the machine on and print a configuration page to confirm that the
machine recognizes the installed board for IEEE 802.11b (Wireless LAN):
User Tools> Printer Features> List/Test Print> Configuration Page
G813I100.WMF
[A]
[B]
[C]
[D]