INSTALLATION OF MFP CONTROLLER OPTIONS
B234/B235/B236/D101/D102/D103 1-126 SM
1.15 INSTALLATION OF MFP CONTROLLER OPTIONS
1.15.1 OVERVIEW
Six slots for boards and three slots for SD cards are provided on the controller box.
Each board or SC card must be inserted into its assigned slot. The slot assignment
of each item is listed in the table below. A decal with the same information is
attached to the controller box cover.
MFP Option Slot/Card Assignment
Slot Name on Decal Description
A1 Tandem Copier Connection Kit B328
A2 External CTL EFI (Fiery) Controller G847
A3 File Format Converter File Format Converter (MLB) B609
B1 USB Host USB Host Type A B825
B2 Options
• IEEE 1284 Centronics
• IEEE 1394 Interface Board Type B (FireWire) B581
• IEEE 802.11b Interface Unit Type H G813 (Wireless LAN)
• Bluetooth Interface Unit B826
• Cumin-M B818
NOTE: Only one of these boards can be inserted at a time.
B3 Ethernet & USB (2.0)
Ethernet & USB 2.0
Gigabit Ethernet Type 7300 G381 (includes USB 2.0)
NOTE: Only one of these boards can be inserted at a time.
C1 System System Slot (Holds the system software. Never remove this SD card!)
C2 Option
• Printer/Scanner Unit Type 1350 B840
• Data Overwrite B735
• PostScript Unit B613
NOTE: This is the only SD card slot available for applications. If more
than one application is to be used, the applications must be merged
onto one SD card.
C3 Service
SD card for machine firmware update by the customer engineer.
• Also for Browser Unit B828
• Also for VM Card B861
B234I999.BMP
SD Card Slot 3 (C3) is located on the
other side of the controller box.
Left side of controller box.
To Next Page
Loading...
