INPUT CHECK
B234/B235/B236/D101/D102/D103 5-174 SM
5.4.2 ADF INPUT CHECK: SP6007
Reading
Class 3
No.
Bit
No.
Description
0 1
7 Inverter Sensor No original Original detected
6 Exit Sensor No original Original detected
5 Registration Sensor No original Original detected
4 Entrance Sensor No original Original detected
3 Original Width Sensor 3 No original Original detected
2 Original Width Sensor 2 No original Original detected
1 Original Width Sensor 1 No original Original detected
1
0 Original Set Sensor No original Original detected
7
ADF Feed-in Motor Encoder
Pulse
Change the “0” and “1” during rotation
6 Pick-up Roller HP Sensor At home position Not home position
5 Bottom Plate Position Sensor Detected Not detected
4 Bottom Plate HP Sensor At home position Not home position
3 Exit Cover Sensor Close Open
2 Feed Cover Sensor Close Open
1 APS Start Sensor Start Off
2
0 DF Position Sensor Down Up
7 Not Used
6 Not Used
5 Not Used
4 Not Used
3 Not Used
2 Original Length Sensor No original Original detected
1
ADF Feed-out Motor Encoder
Pulse
Change the “0” and “1” during rotation
3
0
ADF Transport Motor Encoder
Pulse
Change the “0” and “1” during rotation