Ricoh B234 - Main Machine; Main Unit PM Parts

PM TABLES
B234/B235/B236/D101/D102/D103 2-6 SM
2.2.1 MAIN MACHINE
Main Unit PM Parts
OPTICS 500K 1000K 3000K Note
Exposure glass I R Dry cloth.
1st~3rd mirrors I Optics cloth.
APS sensors I Dry cloth.
Scanner rail I
Dry cloth
Optics dust filter C
Blower brush.
Toner shield glass C Optics cloth.
Scanner Wire Tension Adjustment A Scanner Positioning Pin.
DEVELOPMENT 500K Exp Note
Side seals (x2) C
Blower brush, dry cloth
Development roller C Cleaning required when
developer is replaced.
Use a dry cloth. *
1
Development doctor blade C Cleaning required when
developer is replaced.
Insert the paper dust cleaner
behind the blade to rub away the
paper dust.
Entrance seal C
Toner hopper (outside) I
Blower brush or dry cloth
Gears (all) I
Blower brush
Developer R SP2801 (TD Sensor Initial
Setting). Before execution, be
sure to enter the Lot No. for the
new developer.
Development roller gear: 21Z (X2) 4000K
Paddle roller gear: 42Z 4000K
Idle gear: 23Z 1500K
Toner collection bottle
650K
*1
Discard the waste toner when a
near end or end alert is displayed.
Toner suction bottle About
3000K
*1
Replace when near end or end
alert is displayed.
Toner suction motor About
2500K
*1
Replace when near end or end
alert is displayed.
*1
: K count assumes copying and printing on A4 LEF with 6% test chart.