Ricoh B234 - Shift Tray Operation

DETAILS
B830 52 SM
3.9 SHIFT TRAY OPERATION
3.9.1 OVERVIEW
The movement of the shift tray is controlled by four sensors , ,, and  and a
feeler [A] with two actuators [B] and [C].
• The notched actuator [B] is used with sensors  and .
• The flat actuator [C] is used with sensor .
• Sensor  is provided with its own actuator [D].
The operation mode determines which parts are used to control the movement of
the shift tray.
Sensor Names
No. Name

Paper Height Sensor – Staple Mode

Paper Height Sensor – Standby Mode

Paper Height Sensor – Z-Fold Full

Paper Height Sensor – Shift/Z-Fold
B830D010.WMF




[A]
[B]
[C]
[D]