Key Counter
SM 1-121 B234/B235/B236/D101/D102/D103
Installation
Attaching the Key Counter to the Copier
Attach the key counter to the copier if the LCT is not installed.
1. On the right side of the copier, remove the small cover [A].
2. Remove the jumper connector [B].
3. Fasten the shoulder screw [C] to the side of the machine.
4. Connect the key counter assembly [D].
5. Fit the keyhole of the key counter bracket [E] over the head of the shoulder
screw, then slide it back.
6. Fasten the key counter assembly [F] to the copier ( x 1).
7. Do the User Tool and SP mode settings described at the end of this section.
B070I203.WMF
B070I204.WMF
[A]
[B]
[C]
[D]
[E]
[F]
To Next Page
Loading...
