Ricoh B234 - Shift Motor and Sensors

REPLACEMENT AND ADJUSTMENT
B830 24 SM
1.6.3 SHIFT MOTOR AND SENSORS
1. Remove the end fence (1.6.2)
2. Remove the shift motor bracket [A] (with motor) ( x 4, = x1, x1)
3. Remove the shift motor ( x4)
4. Remove the half-turn sensor bracket [B] ( x 1)
5. Remove half-turn sensor 1 [C] ( x1, Pawls x3)
6. Remove half-turn sensor 2 [D] ( x1, Pawls x3)
B830R950.BMP
B830R951.BMP
[A]
[C]
[D]
[B]