REPLACEMENT AND ADJUSTMENT
B833 10 SM
1.9 PAPER WIDTH SWITCH, PAPER END AND PAPER
LENGTH SENSORS
1. Remove the feed tray and separate the top and bottom. (1.3)
2. Turn over the top half of the feed tray [A] then lay it on a flat surface.
3. Remove the cable cover [B] (Hooks x2)
4. Paper end sensor bracket [C] (Hook x1).
5. Paper end sensor [D] (Hooks x 2, x 1).
6. Paper length sensor bracket [E] (Hook x 1, x 1).
7. Paper length sensor [F] (Hooks x 2, x 1).
8. Paper width switch [G] ( x 1, Harness clamp x 1, x 1).
B833R922.WMF
DSCN1924.BMP
[B]
[A]
[C]
[D]
[E]
[F]
[G]
To Next Page
Loading...
