FIRMWARE UPDATE
B234/B235/B236/D101/D102/D103 5-204 SM
5.10.5 DOWNLOADING STAMP DATA
The stamp data should be downloaded from the controller firmware to the hard
disks:
• When the machine is installed.
• After the hard disks have been replaced.
The print data contains the controller software, so execute SP5853 to download the
fixed stamp data required by the hard disks.
1. Enter the SP mode.
2. Select SP5853 then press “Execute”. The following screen opens while the
stamp data is downloading.
The download is finished with the message prompts you to close.
3. Press the “Close” button then cycle the copier off and on again.
PCcard -> ROM
* * _ _ _ _ _ _ _ _
Stamp Data
Loading
B234S914.WMF
Close
P rocessin g finished. S w itch on
the m ain pow er sw itch.
Note: M ay re-set autom atically.
B234S915.WMF
To Next Page
Loading...
