Ricoh B234 - Tray Lift Switch, Feed Tray

REPLACEMENT AND ADJUSTMENT
SM 3 B833
Multi Bypass
Tray
B833
1.3 TRAY LIFT SWITCH, FEED TRAY
1. Open the bypass tray. (1.1)
2. Remove the covers. (1.2)
3. Use the tip of a screwdriver to remove the tray lift switch cover [A].
4. Remove the tray lift switch [B] ( x 1, hook x 1, standoff x 1,  x 1).
5. Disconnect the tray lift switch connector [C].
6. Disconnect the paper width switch [D] ( x 2, harness clamp x 1).
7. Remove the feed tray [E] ( x 4).
B833R902.WMF
[A]
[B]
[C]
[D]
[E]