REPLACEMENT AND ADJUSTMENT
SM 11 B833
Multi Bypass
Tray
B833
1.10 PAPER HEIGHT SENSORS, LIFT MOTOR
1. Open the bypass tray. (1.1)
2. Remove the bypass tray covers. (1.2)
3. Remove the feed tray. (1.3)
Paper Height Sensors
1. Paper Height Sensor 1 [A] (Hooks x 3, x 1)
2. Paper Height Sensor 2 [B] (Hooks x 3, x 1)
3. Paper Height Sensor 3 [C] (Hooks x 3, x 1)
Lift Motor
1. Remove screws ( x6) then push lift motor [D] to loosen its frame.
2. Raise the loosened frame slightly to remove the lift motor ( x2, x1)
B833R933.BMP
B833R924.BMP
[A]
[B]
[C]
[D]
To Next Page
Loading...
