Firmware Update
SM 5-207 B234/B235/B236/D101/D102/D103
Service
Tables
5.10.7 INSTALLING ANOTHER LANGUAGE
Many languages are available for selection, but only two can be selected for
switching. Follow this procedure to select the two languages, either of which can be
selected for the user interface on the operation panel.
1. Switch the copier main power switch off.
2. Insert the SD card with the language data into service slot C3.
3. Switch the copier main power switch on. The initial screen opens after about 10
seconds.
4. Touch the “Language (2)” on the screen (or press ).
5. Touch “LANG. 1(1)” or “LANG 2(2)
Key What it does
LANG. 1(1)
Touch this button on the screen (or press on the 10-key pad) to open the next
screen so you can select the 1st language.
LANG. 1(2)
Touch this button on the screen (or press on the 10-key pad) to open the next
screen so you can select the 2nd language.
Exit(0)
Touch this key on the screen (or press on the 10-key pad) to quit the update
procedure and return to normal screen.
Download Language L C D C R O M B 0 7 0 5 3 7 0 L a n g . C a rd - - - - - -
Now Lang.
J a p a n e s e 2 .87
- - - - - -
Englis h - U K 2 .87
- - - - - -
S e lect Lang.
-> ------------ ---------------
---------------
-> ------------ ---------------
---------------
Exit(0)
LANG. 2(2)
LANG. 1(1)
B234S916.WMF
To Next Page
Loading...
