Ricoh B234 - Paper Feed Units 1, 2, 3

PAPER FEED
SM 3-93 B234/B235/B236/D101/D102/D103
Replacement
Adjustment
3.10.3 PAPER FEED UNITS 1, 2, 3
NOTE: This procedure uses the 1st feed unit as an example. The procedures for
the 2nd and 3rd trays are the same.
1. Turn off the main switch.
2. Right front door. (3.3.3)
3. Right lower cover. (3.3.4)
NOTE: If the LCT is installed, disconnect it.
4. Toner collection bottle (3.6.5)
5. Lift the vertical transport guide [A] and remove it.
6. Remove knob [B] ( x 1).
7. Remove knob [C] ( x 1).
8. Pull out the three trays and remove the paper tray unit inner cover [D] ( x 2).
B234R702.WMF
B234R701.WMF
[A]
[B]
[C]
[D]