Ricoh B234 - Paper Feed Rollers

PAPER FEED
3-92
3.10.2 PAPER FEED ROLLERS
1. Turn off the main switch.
2. Paper tray for the appropriate feed unit. (3.10.1)
3. Pick-up roller [A] ( x 1).
4. Feed roller [B] ( x 1).
5. Remove separation roller [C] from the torque limiter [D] ( x 1).
Important
• The feed rollers of the main machine and the LCT are not interchangeable
because they turn in different directions.
• After replacing a feed roller in the main machine, always make sure that it
turns counterclockwise in the direction of paper feed.
• Do not touch the surface of the rollers with your bare hands.
6. Reset the PM count to zero for the new rollers (see section 2.1.2).
B234R804.WMF
[B]
[A]
[C]
[D]