Ricoh B234 - Energy Saver Mode; Entering the Energy Saver Mode; Return to Stand-By Mode; What Happens in Energy Saver Mode

ENERGY Conservation MODES
B234/B235/B236/D101/D102/D103 6-184 SM
6.19.2 ENERGY SAVER MODE
Entering the energy saver mode
The machine enters energy saver mode when one of the following is done.
• The Energy Saver Key is held down for a second.
• The panel off timer runs out after the last job (User Tools - System Settings -
Timer Setting - Panel Off Timer: default setting is 60 s).
What happens in energy saver mode
When the machine enters energy saver mode, the operation panel indicators are
turned off except for the Energy Saver LED and the Power LED.
If the CPU receives the image print out command from an application (e. g. to print
data from a PC), the fusing temperature rises to print the data. However, the
operation indicators stay off.
Return to stand-by mode
If one of the following is done, the machine returns to stand-by mode:
• The Energy Saver Mode key is pressed
• An original is placed in the ADF
• The ADF is lifted
• An SC occurs
• A hard key on the operation panel, or a soft key on the display panel is touched
• Front door is opened
Operation
Switch
Energy Saver
LED
Fusing Temp.
Approx.
Recovery Time
System +5V
On On
B234/B235/D101/D102:
Stays at the standby
temperature
• B234/D101: 153 °C
• B235/D102: 165 °C
B236/D103: Stays at the
standby temperature
minus 5 °C (178 °C – 5
°C)
3 s On