Ricoh B234 - Setting the Paper Size for the Right Tandem Tray; Tandem Feed Tray Paper Size Change

PAPER FEED
3-116
3.10.19 TANDEM FEED TRAY PAPER SIZE CHANGE
NOTE: This tray is set up for A4 or LT LEF at the factory. Only A4 or LT LEF paper
can be used for tandem feed.
1. Open the front cover.
2. Pull out the tandem feed tray [A] and remove the left and right tandem trays.
(3.10.1)
Setting the Paper Size for the Right Tandem Tray
1. Right tandem inner cover [C]. ( x 2)
2. Re-position the side fences [D] ( x 1 each).
NOTE: Outer: A4, Inner: LT.
3. Re-install the right tandem inner cover [C].
B234R564.WMF
B234R993.WMF
[D]
[C]
[A]
[B]