DEVELOPMENT AND TONER SUPPLY
SM 3-65 B234/B235/B236/D101/D102/D103
Replacement
Adjustment
Re-installing the Development Unit
Important: When you reinstall the
development unit, handle it carefully.
• Never allow the corner of the
development roller n to hit the OPC drum
o or any other part of the frame of the
development unit drawer.
• Scratches or other damage to either the
drum or development roller will
adversely affect the operation of the
machine.
To reinstall the development unit
4. Align the triangular reference marks of
the development unit and drawer
frame.
5. Place the holes on the edge of the
development unit over the pegs on the
drawer frame.
6. Push the development unit drawer into
the machine, reattach the faceplate
and inner cover, then close the right
front door. (3.3.2)
7. Reconnect the power cable and other cables.
8. Press the main power switch to turn the
machine on and wait for the machine to
warm up.
B234R983.WMF
B234R984.WMF
o
n
To Next Page
Loading...
