Ricoh B234 - Accessories; Installation; Usb 2.0 Host Interface (B825)

Installation of MFP controller Options
SM 1-145 B234/B235/B236/D101/D102/D103
Installation
1.15.11 USB 2.0 HOST INTERFACE (B825)
Accessories
Description Q’ty
1. USB 2.0 Board.......................................................................1
2. Clamp .................................................................................... 1
3. Cable (2.5 m)......................................................................... 1
Installation
1. Switch the machine off.
2. Remove the cover [A] of Slot B1 ( x
2).
3. Insert the USB 2.0 board [B] into Slot
B1 and fasten it with the screws.
4. Print a configuration page to confirm
that the machine recognizes the
installed board for USB2.0:
User Tools > Printer Features >
List/Test Print > Configuration Page
B825I100.WMF
[A]
[B]