Ricoh B234 - Accessories; Ieee 1394 Kit (B581); Installation

Installation of MFP controller Options
SM 1-147 B234/B235/B236/D101/D102/D103
Installation
1.15.13 IEEE 1394 KIT (B581)
Accessories
Description Q’ty
1. IEEE 1394 Board...................................................................1
2. 4-Pin Cable............................................................................1
3. 5-Pin Cable............................................................................1
Installation
Only one PCI slot (B2) is available for one of
these options:
• Centronics 1284
• IEEE 1394 (FireWire)
• IEEE 801.11b (Wireless LAN)
• Bluetooth Interface Unit B826
• Cumin-M B818
Important
• If another card is installed in B2, you must
remove it before installing this card.
1. Switch the machine off.
2. Remove the cover [A] of Slot B2 ( x 2)
3. Insert the IEEE 1394 board [B] into Slot B2
and fasten it with the screws.
4. Switch the machine on and print a configuration page to confirm that the
machine recognizes the installed board for IEEE 1394 (FireWire):
User Tools> Printer Features> List/Test Print> Configuration Page
B581I202.WMF
[A]
[B]