Ricoh B234 - Finisher Input Check: Sp6112 (B)

Input Check
SM 5-175 B234/B235/B236/D101/D102/D103
Service
Tables
5.4.3 FINISHER INPUT CHECK: SP6112 (B830)
001 Entrance Sensor 026 Exit Guide Open Sensor
002 Upper Exit Tray Sensor 027 Stapler Rotation Sensor 2
003 Shift Tray Exit Sensor 1 028 Staple Ready Sensor
004 Stapler Tray Exit Sensor 029 Stack Plate HP Sensor (Front)
005 Shift Tray Lower Limit Sensor 030 Stack Plate HP Sensor (Back)
006 Shift Tray Near Full Sensor 031 Positioning Roller HP Sensor
007 Feed-Out Belt HP Sensor 032 Return Drive HP Sensor
008 Jogger HP Sensor 033 Stapling Paper Height Sensor
009 Shift Tray Half-Turn Sensor 1 034
Shift Lower Limit Sensor (Large
Paper)
010 Stapler HP Sensor (Front/Rear) 035 Punch HP Sensor 2
011 Stapler HP Sensor 036 Shift Jogger Sensor
012 Staple Out Sensor 037 Shift Jogger HP Sensor
013 Staple Tray Paper Sensor 038 Shift Jogger Retraction HP Sensor
014 Front Door Open Switch] 039 Emergency Stop Switch
015 Punch Detection Sensor 040 Top Fence HP Sensor
016 Punch HP Sensor 1 041 Bottom Fence HP Sensor
017 Punch-out Hopper Full Sensor 042
LowerTray Full Sensor (Z-Folded
Paper)
018 Stapling Paper Height Sensor 043 Shift Tray Exit Sensor 2
019 Staple Mode HP Sensor 044 Upper Tray Junction Gate HP Sensor
020 Jam Detection Sensor 045 Staple Junction Gate HP Sensor
021 Upper Tray Full Sensor 046 Pre-Stack Junction Gate HP Sensor
022 Stapler Rotation Sensor 1 047 Pre-Stack Sensor (Right)
023
Stapler Trimmings Hopper Full
Sensor
048
Pre-Stack Junction Gate Release HP
Sensor
024 Pre-Stack Sensor 049 Shift Tray Half-Turn Sensor 2
025 Stack Plate HP Sensor (Center) 050 Staple Trimmings Hopper Set Sensor