PRINTER BIT SWITCH SETTINGS
B234/B235/B236/D101/D102/D103 5-218 SM
5.13 PRINTER BIT SWITCH SETTINGS
1001 Bit Switch
Bit Switch 1 0 1
bit 0 DFU - -
bit 1 DFU - -
bit 2 DFU - -
No I/O Timeout 0: Disable 1: Enable bit 3
Enable: The MFP I/O Timeout setting will have no effect. I/O Timeouts will
never occur.
SD Card Save Mode 0: Disable 1: Enable bit 4
Enable: Print jobs will be saved to an SD Card in the GW SD slot (☛
“Card Save Function” in "System Maintenance Reference" section of the
Field Service Manual).
bit 5 DFU - -
bit 6 DFU - -
[RPCS,PCL]: Printable area frame border 0: Disable 1: Enable
001
bit 7
Enable: The machine prints all RPCS and PCL jobs with a border on the
edges of the printable area.
⇒
Rev.04/08/2009
To Next Page
Loading...
