BOOKLET FINISHER BK5000 (B836)
B234/B235/B236/D101/D102/D103 1-96 SM
Connecting the Booklet Finisher B836
1. Open the front door of the finisher.
2. Pull out the locking lever [A] ( x1).
3. Align the finisher [B] with the joint brackets [C], then slowly push the finisher
onto the brackets.
4. Connect the finisher cable [D] to the copier
5. Push in the locking lever.
6. Check that the top edges of the finisher are parallel with edges of the finisher
(or copier) to the right.
7. Fasten the locking lever [A] ( x 1)
8. Close the front door.
9. Set the leveling shoes [E] (x3) under the feet.
10. Turn the nuts to adjust the height of the finisher until it is level.
B836I106.WMF
B836I203.WMF
[A]
[B]
[C]
[D]
[E]
To Next Page
Loading...
