PAPER FEED
B234/B235/B236/D101/D102/D103 6-122 SM
6.14.8 TANDEM FEED – TRAY 1
Overview
1,000 sheets of paper can be set in the left tray [A] and right tray [B] of tray 1, the
tandem paper tray. Paper is fed from the right tray. When the paper in the right tray
runs out, the paper stack in the left tray automatically is pushed to the right tray.
After the stack is moved from the left tray to the right tray, paper feeding resumes.
Normally both the right and the left trays are joined. However, during copying, if
there is no paper in the left tray, the left tray can be pulled out to load paper while
the right tray stays in the machine so paper feed can continue.
NOTE: After moving the adjustable side fences for a different paper size, be sure
to execute SP5019 002 (Tray Paper Size Selection – 1st Tray) to select the
correct setting for the paper size loaded in the tandem tray. (The tandem
tray cannot detect the paper size automatically.)
B234D963.WMF
[A]
[B]
To Next Page
Loading...
