COPY IMAGE ADJUSTMENT: PRINTING/SCANNING
3-186
Blank Margin
NOTE: If the leading edge/side-to-side registration cannot be adjusted within the
specifications, adjust the leading/left side edge blank margin.
1. Check the trailing edge and right side edge blank margins using the Trimming
Area Pattern, and adjust them using the following SP modes if necessary.
SP mode Specification
Trailing edge
SP2101 002
3 ± 2 mm
Right edge
SP2101 004
2 ± 1.5 mm
Leading edge
SP2101 001
4 ± 2 mm
Left edge
SP2101 003
2 ± 1.5 mm
D
C
B
A
B234R889.WMF
A: Trailing Edge Blank Margin
B: Right Edge Blank Margin
C: Leading Edge Blank Margin
D: Left Edge Blank Margin
To Next Page
Loading...
