Ricoh B234 - Page 517

SERVICE CALL CONDITIONS
SM 4-97 B234/B235/B236/D101/D102/D103
Trouble-
shooting
Inserter Drive Switch Sensor (S16)
SC798-25 B
The drive switch sensor in the inserter unit
did not go OFF within the time prescribed for
the drive switching motor (M2) to switch
drives.
-or-
The drive switch sensor in the inserter unit
did not go ON within the prescribed time.
• Drive switch motor (M2)
defective
• Drive switch sensor
(S16) defective
• Sensor or motor
connector loose, broken,
defective
Inserter Tray A Error
SC798-26 B
Inserter Tray A (upper tray) failed to
leave its lower limit sensor (S11) within
the prescribed time after the Tray A lift
motor turned on.
-or-
Inserter Tray A (upper tray) failed to
arrive at its paper feed sensor (S4)
within the prescribed time after the
Tray A lift motor turned on.
• Lift Motor: Tray A (M3)
defective
• Lower limit sensor: Tray A
(S11) defective
• Paper feed sensor (S4)
defective
• Sensor or motor connector
loose, broken, defective
Inserter Tray B Error
SC798-27 B
Inserter Tray B (lower tray)
failed to leave its lower limit
sensor (S12) within the
prescribed time after the
Tray B lift motor turned on.
-or-
Inserter Tray B (lower tray)
failed to arrive at its paper
feed sensor (S10) within the
prescribed time after the
Tray B lift motor turned on.
• Lift Motor: Tray B (M4) defective
• Lower Limit Sensor: Tray B (S12)
defective
• Sensor or motor connector loose, broken,
defective