AMD Elan SC520 - Additional Information; Documentation Conventions; Table 0-1 Documentation Notation

Introduction
Élan™SC520 Microcontroller User’s Manual xxv
■ E86 Family Products and Development Tools CD , order #21058, provides a single-
source multimedia tool for customer evaluation of AMD products, as well as FusionE86
partner tools and technologies that support the E86 family. Technical documentation is
included on the CD in PDF format.
To order literature, contact the nearest AMD sales office or call the literature center at one
of the numbers listed on the back cover of this manual. In addition, these documents are
available in PDF form on the AMD web site. To access the web site, go to www.amd.com
and follow the Embedded Processor link for information about the E86 family.
Additional Information
The following non-AMD documents and sources provide additional information that may
be of interest to ÉlanSC520 microcontroller users:
■ PCI Local Bus Specification, Revision 2.2, December 18, 1998, PCI Special Interest
Group, 800-433-5177 (US), 503-693-6360 (International), www.pcisig.com.
■ IEEE Std 1149.1-1990 Standard Test Access Port and Boundary-Scan Architecture,
(order #SH16626-NYF), Institute of Electrical and Electronic Engineers, Inc., 800-678-
4333, www.ieee.org.
■ PCI System Architecture , Mindshare, Inc., Reading, MA: Addison-Wesley, 1995, ISBN
0-201-40993-3.
■ ISA System Architecture , Mindshare, Inc., Reading, MA: Addison-Wesley, 1995, ISBN
0-201-40996-8.
■ 80486 System Architecture , Mindshare, Inc., Reading, MA: Addison-Wesley, 1995, ISBN
0-201-40994-1.
■ The Indispensable PC Hardware Book , Hans-Peter Messmer, Wokingham, England:
Addison-Wesley, 1995, ISBN 0-201-87697-3.
DOCUMENTATION CONVENTIONS
Table 0-1 lists the documentation conventions used throughout this manual.
Table 0-1 Documentation Notation
Notation Meaning
Reset Default Values
Default Value after a system reset
0 Low
1 Active or High
x No value is guaranteed
?
Determined by sources external to the ÉlanSC520
microcontroller
Read/Write Attributes
R
The bit field is read-only. A write to the register at this bit field
has no effect. The contents may or may not be changed by
hardware.