Broadcom NetXtreme/NetLink BCM5718 Series

Central Power Management Unit (CPMU) RegistersBCM5718 Programmer’s Guide
Broadcom®
January 29, 2016 • 5718-PG108-R Page 402
WDMA Idle 15 RW 0 Link idle/Host Access condition control.
1: disable this idle condition when entering link
idle mode and host access mode.
0: enable this idle condition when entering link
idle mode and host access mode.
RDMA Idle 14 RW 0 Link idle/Host Access condition control.
1: disable this idle condition when entering link
idle mode and host access mode.
0: enable this idle condition when entering link
idle mode and host access mode.
MSI Idle 13 RW 0 Link idle/Host Access condition control.
1: disable this idle condition when entering link
idle mode and host access mode.
0: enable this idle condition when entering link
idle mode and host access mode.
TXMAC FIFO empty 12 RW 0 Link idle/Host Access condition control.
1: disable this idle condition when entering link
idle mode and host access mode.
0: enable this idle condition when entering link
idle mode and host access mode.
RXMAC FIFO empty 11 RW 0 Link idle/Host Access condition control.
1: disable this idle condition when entering link
idle mode and host access mode.
0: enable this idle condition when entering link
idle mode and host access mode.
COL = 0 10 RW 0 Link idle/Host Access condition control.
1: disable this idle condition when entering link
idle mode and host access mode.
0: enable this idle condition when entering link
idle mode and host access mode.
CRS = 0 9 RW 0 Link idle/Host Access condition control.
1: disable this idle condition when entering link
idle mode and host access mode.
0: enable this idle condition when entering link
idle mode and host access mode.
TXAMAC Idle 8 RW 0 Link idle/Host Access condition control.
1: disable this idle condition when entering link
idle mode and host access mode.
0: enable this idle condition when entering link
idle mode and host access mode.
RXER = 0 7 RW 0 Link idle/Host Access condition control.
1: disable this idle condition when entering link
idle mode and host access mode.
0: enable this idle condition when entering link
idle mode and host access mode.
Name Bits Access
Default
Value
Description