Broadcom NetXtreme/NetLink BCM5718 Series

Central Power Management Unit (CPMU) RegistersBCM5718 Programmer’s Guide
Broadcom®
January 29, 2016 • 5718-PG108-R Page 403
RXDV = 0 6 RW 0 Link idle/Host Access condition control.
1: disable this idle condition when entering link
idle mode and host access mode.
0: enable this idle condition when entering link
idle mode and host access mode.
MDIO Idle 5 RW 0 Link idle/Host Access condition control.
1: disable this idle condition when entering link
idle mode and host access mode.
0: enable this idle condition when entering link
idle mode and host access mode.
FTQ empty 4 RW 0 Link idle/Host Access condition control.
1: disable this idle condition when entering link
idle mode and host access mode.
0: enable this idle condition when entering link
idle mode and host access mode.
GRC Idle 3 RW 0 Link idle/Host Access condition control.
1: disable this idle condition when entering link
idle mode and host access mode.
0: enable this idle condition when entering link
idle mode and host access mode.
MBUF empty 2 RW 0 Link idle/Host Access condition control.
1: disable this idle condition when entering link
idle mode and host access mode.
0: enable this idle condition when entering link
idle mode and host access mode.
MA Idle 1 RW 0 Link idle/Host Access condition control.
1: disable this idle condition when entering link
idle mode and host access mode.
0: enable this idle condition when entering link
idle mode and host access mode.
No core reset 0 RW 0 Link idle/Host Access condition control.
1: disable this idle condition when entering link
idle mode and host access mode.
0: enable this idle condition when entering link
idle mode and host access mode.
Name Bits Access
Default
Value
Description