Send comments to nx5000-docfeedback@cisco.com
1-83
Cisco Nexus 5000 Series Command Reference
OL-16599-01
Chapter 1 Basic System Commands
show hardware internal
show hardware internal
To display information about the physical device hardware, use the show hardware internal command.
show hardware internal
Syntax Description This command has no arguments or keywords.
Command Default None
Command Modes EXEC mode
Command History
Examples This example shows how to display information about the physical device hardware:
switch# show hardware internal
Related Commands
Release Modification
4.0(0)N1(1a) This command was introduced.
Command Description
show inventory Displays hardware inventory information.
show module Displays information about the modules.
To Next Page
Loading...
