Cisco AP775A - Nexus Converged Network Switch 5010 - Port-Security Commit

Send comments to nx5000-docfeedback@cisco.com
8-111
Cisco Nexus 5000 Series Command Reference
OL-16599-01
Chapter 8 Fibre Channel Commands
port-security commit
port-security commit
To apply the pending configuration pertaining to the port security Cisco Fabric Services (CFS)
distribution session in progress in the fabric, use the port-security commit command.
port-security commit vsan vsan-id
Syntax Description
Command Default None
Command Modes Configuration mode
Command History
Examples The following example shows how to commit changes to the active port security configuration:
switch(config)# port-security commit vsan 13
Related Commands
vsan vsan-id Specifies the VSAN ID. The range is 1 to 4093.
Release Modification
4.0(0)N1(1a) This command was introduced.
Command Description
port-security
distribute
Enables CFS distribution for port security.
show port-security Displays port security information.