Send comments to nx5000-docfeedback@cisco.com
1-99
Cisco Nexus 5000 Series Command Reference
OL-16599-01
Chapter 1 Basic System Commands
show running-config diff
show running-config diff
To display the differences between the running configuration and the startup configuration, use the show
running-config diff command.
show running-config diff
Syntax Description This command has no arguments or keywords.
Command Default None
Command Modes EXEC mode
Command History
Usage Guidelines Table 1-7 describes the notations used in the command output.
Examples This example shows how to display the difference between the running configuration and the startup
configuration:
switch# show running-config diff
Release Modification
4.0(0)N1(1a) This command was introduced.
Table 1-7 show running-config diff Notations
Notation Description
*******************
––– line1, line2 ––––
*** line1, line2 ****
Indicates ranges of lines where differences occur. The range of lines
indicated with asterisks (*) is for the startup configuration and the range
indicated with dashes (–) is for the startup configuration.
+ text
Indicates that the line is in the running configuration but is not in the startup
configuration.
– text
Indicates that the line is not in the running configuration but it is in the
startup configuration.
! text
Indicates that line exists in both configurations but in different orders.
To Next Page
Loading...
