Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference

Send comments to nx5000-docfeedback@cisco.com
8-78
Cisco Nexus 5000 Series Command Reference
OL-16599-01
Chapter 8 Fibre Channel Commands
fctimer distribute
fctimer distribute
To enable Cisco Fabric Services (CFS) distribution for Fibre Channel timer (fctimer), use the fctimer
distribute command. To disable this feature, use the no form of the command.
fctimer distribute
no fctimer distribute
Syntax Description This command has no other arguments or keywords.
Command Default Disabled.
Command Modes Configuration mode
Command History
Usage Guidelines Before distributing the Fibre Channel timer changes to the fabric, the temporary changes to the
configuration must be committed to the active configuration using the fctimer commit command.
Examples The following example shows how to change the default Fibre Channel timers:
switch(config)# fctimer distribute
Related Commands
Release Modification
4.0(0)N1(1a) This command was introduced.
Command Description
fctimer commit Commits the Fibre Channel timer configuration changes to the active
configuration.
show fctimer Displays fctimer information.

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English