Send comments to nx5000-docfeedback@cisco.com
7-23
Cisco Nexus 5000 Series Command Reference
OL-16599-01
Chapter 7 System Management Commands
ntp sync-retry
ntp sync-retry
To retry synchronization with the configured NTP servers, use the ntp sync-retry command.
ntp sync-retry
Syntax Description This command has no arguments or keywords.
Command Default None
Command Modes EXEC mode
Command History
Examples The following example shows how to retry synchronization with the configured NTP servers:
switch# ntp sync-retry
Related Commands
Release Modification
4.0(0)N1(1a) This command was introduced.
Command Description
ntp distribute Enables CFS distribution for NTP.
show ntp Displays NTP information.
To Next Page
Loading...
