Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference

Send comments to nx5000-docfeedback@cisco.com
8-58
Cisco Nexus 5000 Series Command Reference
OL-16599-01
Chapter 8 Fibre Channel Commands
fcns no-auto-poll
fcns no-auto-poll
To enable or disable automatic polling in the name server database, use the fcns no-auto-poll command.
fcns no-auto-poll [vsan vsan-id] | [wwn wwn-id]
no fcns no-auto-poll [vsan vsan-id] | [wwn wwn-id]
Syntax Description
Command Default None
Command Modes Configuration mode
Command History
Examples The following example shows how to disable automatic polling for VSAN 2:
switch(config)# fcns no-auto-poll vsan 2
Related Commands
vsan vsan-id (Optional) Specifies a VSAN ID. The range is 1 to 4093.
wwn wwn-id (Optional) Specifies the port WWN, with the format
hh:hh:hh:hh:hh:hh:hh:hh.
Release Modification
4.0(0)N1(1a) This command was introduced.
Command Description
show fcns Displays the name server database and statistical information for a specified
VSAN or for all VSANs.

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English